910 p&b dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. catalog 1308242 issued 3-03 specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. kbp series 10 amp dual coil latching relay file e29244 users should thoroughly review the technical data before selecting a product part number. it is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. features ?dual coil latching relay accepts a momentary impulse to one coil to latch and a second impulse to the other coil to release. ?enclosed in a clear polycarbonate dust cover. ?ac or dc coils. ?contacts up to 5pdt. ?mounts in 11 or 20-pin octal-type plugs. contact data @ +25? arrangements: from 2 form c (dpdt) to 5 form c (5pdt), (3pdt each coil). ratings: 10 amps @ 120vac. materials: 10 amp models: silver-cadmium oxide. expected life: 500,000 operations, mechanical; 50,000 operations minimum at rated loads. initial dielectric strength between open contacts: 500v rms. between adjacent contacts: 1,000v rms. between contacts and coil: 1,000v rms. coil data @ +25? nominal power: dc coils: 2.7w. ac coils: 5.3va to 4 pole; 7.8va to 5 pole. maximum power: dc coils - 4.0w. duty cycle: intermittent. initial insulation resistance: 100 megohms. operate data @ +25? must-operate voltage: dc: 75% of nominal voltage. ac: 85% of nominal voltage. operate time: 25 milliseconds excluding bounce. environmental data temperature range: storage: 105 c. operating: -45? to +85?. mechanical data termination: see terminals table on next page. enclosures: plastic dust cover standard. hermetically sealed metal case available on special order. weight: 10.8 oz. (306g) approximately. coil data resistance in nominal nominal ohms current voltage 10% @ 25? milliamperes dc 12 52.0 230 coils 24 230 104 48 850 56.5 (to 5 pole) 110 4560 24 220 use 110 volt relay with 5000 ohms, 5 watt resistor in series. resistance in nominal nominal ohms current voltage 15% @ 25? milliamperes up to 4 pole relays 24 42 210 ac 120 1030 44 coils 240 4100 22 for 5 pole relays 24 27 325 120 700 68
911 p&b dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. catalog 1308242 issued 3-03 specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. wiring diagrams (bottom views) .875 ref. typ . (22.23) 1.187 ref. typ . (30.15) 1.781 max. typ . (45.24) 3.56 max. (90.4) .44 .03 (11.2 .8) 1.25 .03 (31.8 .8) 2.406 max. (61.11) .56 .03 (14.2 .8) 2 holes .157 dia. ref. (3.99) .91 ref. (23.1) 1.265 (32.13) .16 5 (4.19) 1.496 ref. (38.00) .156" dia. (4) mtg. holes (2 holes each for end or bottom mounting.) .250 (6.35) .005 (0.127) .010 (0.254) .500 (12.7) 2.205 max. (36.01) 1.812 .015 (46.02 0.38) 1.375 (34.92) .031 ref. (0.79) .25 (6.35) 3.22 (81.79) 1.609 (40.87) note: shown with reset coil energized last. kbp11 kbp17 9 13 12 1 0 14 16 15 1 7 18 8 6 4 2 7 5 3 20 19 1 reset latch kbp20 9 1 1 13 12 1 0 14 16 15 1 7 18 8 6 4 2 7 5 3 20 19 1 reset latch 1 1 5 6 latch reset 7 8 9 10 11 4 3 2 1 our authorized distributors are more likely to maintain the following items in stock for immediate delivery. kbp-11ag-120 kbp-11dg-24 kbp-11dg-110 kbp-20ag-120 outline dimensions dust cover 27e928 socket kb-open style kb-17ag-120 kb-17dg-12 ordering information typical part number b kbp -11 a g -24 1. type: kbp = enclosed, dual coil latching relay. kb = open, dual coil latching relay. 2. contact arrangement: 11 = 2 form c (dpdt) 17 = 4 form c (4pdt) 20 = 5 form c (5pdt) 3. coil input: a = ac d = dc 4. contact rating: g = 10 amps @ 120vac, 80% pf. 5. coil voltage: 12, 24, 48, 110vdc specify the same latch and release coil voltage for standard kbp 24, 120, 240vac relays. unlike coils available on special order.
|
